|
|
Type-N CATEGORY
|
PCB connector (PCB mount)
|
-
Right Angle Bulkhead Jack (female)
|
-
Bulkhead Jack (female)
|
|
Cable connector
|
-
Straight Jack (female)
|
-
Straight plug (male)
|
-
Straight Bulkhead Jack (female)
|
|
Panel Mount Connector
|
-
Straight Jack (female)
|
-
Straight plug (male)
|
-
Straight Bulkhead Jack (female)
|
|
Press Fit
|
-
Straight Bulkhead Jack (female)
|
|
Feed Through
|
|
Cable Switch
|
|
|
|
|
|
|
Interface Mating Dimensions
|
Technical Data
|
|
Material / Finish : |
|
Material |
Finish |
Connector body |
Brass per (QQ-B-626 or JIS-C3604B) |
Nickel or Tri-alloy plating |
Center contact male |
Brass per (QQ-B-626 or JIS-C3604B) |
Gold plating |
Center contact female |
Beryllium copper per (QQ-C-530 or JIS-C1730) or
Phosphor bronze per (QQ-B-750 or JIS-C5441B) |
Gold plating |
Insulator |
PTFE |
None |
Crimp ferrule |
Annealed copper |
Same as body |
Gasket |
Silicone rubber |
None |
|
Electrical : |
Nominal impedance |
50Ω |
Frequency up to |
11 GHz |
VSWR |
1.15 + 0.02xf GHz max. |
Working voltage |
500 Volts rms |
Dielectric withstanding voltage |
2500 Volts rms |
Insulation resistance |
5000 MΩ min. |
Contact resistance |
center conductor 1.5 mΩ
outer conductor 1.5 mΩ. |
|
Mechanical & Environmental : |
Mating |
5/8"-24 UNEF thread coupling |
Cable retention |
10 kgf typical |
Durablility |
≧500 cycles |
Coupling nut retention |
20 kgf min. |
Temperature range |
-55℃ to+155℃ |
Vibration |
Per MIL-STD-202 Method 204 Test Condition D |
Corrosion |
Per MIL-STD-202 Method 101 Test Condition B |
|
|
|
|
|